The carefully considered design of the Vega meets even the most demanding crop protection requirements

  • The clear design focus on the exclusively rear-folding RA boom provides large ground clearance and a low centre of gravity.
  • The Vega is available with tank volumes of 3,000, 4,000 and 5,000 litres and boom widths of 15 to 30 metres.
  • The inductor and electronic operating panel are optimally integrated with the modern plastic tank.
  • A true circulation pipe routed inside the aluminium boom keeps spray fluid circulating continuously
    throughout the pipe system, without inactive sections. Eltec Pro single-nozzle control responds
    without delay.
  • The Vega drawbar is available in a topmounted and bottom-mounted version; steering and suspension are optional. The axle comes in a rigid, mechanical or pneumatically suspended
    version. Possible track widths range from 1.50 m to 2.25 m.
  • The Vega 12 is only available in an ISOBUS version. The new MegaSpray operating concept simplifies the control of complex functions through an intuitive menu design. LEMKEN offers the CCI.50, CCI.200 or CCI.1200 operating terminals for the Vega 12. However, any other AEF-certified universal terminal can also be used and there are a range of auxiliary control elements available.


Die Vega 12/4000 mit 27 Meter
Arbeitsbreite ist durch ENTAM zertifiziert



Vega 12/3000 Vega 12/4000 Vega 12/5000
Weight (kg) 3.100 3.250 3.300
Tank volume (l) 3.100 4.400 5.500


  • Electronic operation MegaSpray with preparation for operation with any ISOBUS Terminal, 13 width sections freely configurable
  • Spraying boom operation Premium SEH ISOBUS: Electrohydraulic operation for spraying boom lifting / lowering + symmetric / asymmetric folding + asymmetric angle adaptation + sequence control transport-working position
  • Piston diaphragm pump 2 x 200 litres/min capacity
  • Tyres 340/85 R 48 with Vega 12/3000 and 12/4000, 380/90 R 46 with Vega 12/5000
  • Dual line air pressure brake system
  • Drawbar height adjustable, upper connection for trailer coupling
  • Height-adjustable traction loop, Ø 40 mm
  • 3" Kamlok suction connection
  • Electronic operation of selection and distribution valves via 4.6” colour display with scroll wheel control
  • Level indicator TankPilot, electronically readable at the implement and at the operating terminal
  • Filling stop, automatic for suction connection
  • Main tank with integrated tank baffle
  • 4 rotating internal cleaning nozzles
  • Injector agitator with electrical switch-off dependent on fill level
  • Electric agitator regulation
  • Clean water tank 550 litres, integrated in wheel cover
  • Direct level indicator for clean water tank
  • Height-adjustable inductor with circulation nozzles, ProFlow, agitator nozzle and canister cleaning nozzle
  • PTO shaft
  • Platform with handrail and folding ladder
  • Storage box on the right in the direction of travel and utility compartment on the left in the direction of travel

Road Transportation


Stefan Bonsels, Neukirchen-Vluyn

The distance between our fields is up to 20 km and therefore I spend a lot of time on the road. The Vega always rolls calmly and it stays absolutely stable.

Reduced transport time with 60 km/h admission
  • Modern tank design with integrated baffle
  • The rear folded boom keeps the centre of gravity far rearward and very low
  • Reduced transport time with a 60 km/h admission when equipped with a suspended chassis


Fluid system


Steward Russel

The individual nozzle control of the Vega is excellent. In my opinion it saves a lot of money on chemicals. There are no more overlaps in the field and crops are growing evenly. That is an additional advantage.

The Eltec Pro single nozzle control
  • The liquid system with incorporated electric valves provides best operation comfort and minimal technical residues
  • The genuine circulation pipe without inactive sections allows strong cleaning up to the valves
  • Central and lateral boom injection for excellent distribution
  • The Eltec Pro real single nozzle control provides precise application without any delay


Chemical inductor

Chemical inductor
  • Perfectly integrated chemical inductor
  • Steplessly height adjustment
  • The optimized interior design and a strong agiator nozzle ease the induction of chemicals
  • Edge dampening without misting


Semi-automated operating concept
  •  With the new, semi-automated operating concept, functions are called directly by pressing a button
  •  The electric valves adjust automatically according to the function
  • Integrated digital level indicator with filling stop
  • The ISOBUS control MegaSpray is operated intuitively
  • For maximum operation comfort user-configurable Aux-N conrtrols can be used